How we build
Build Quality
Small details make a difference. Here are the materials and installation practices we specify. Your contract identifies the features included in your build.
Design
We design it in 3D first
Before anything is built, Max models the project in 3D. You can see the layout, the ceiling heights and the finishes before construction starts, and changes happen on screen instead of on site. Here are 3D models from past projects; tap one to see how it turned out.
Myrtle Ave ADU
See the finished project →
37th St ADU
See the finished project →
Gastman Way ADU
See the finished project →
Jonas Ave ADU
See the finished project →
U St ADU
See the finished project →
Casilada Way ADU
See the finished project →
25 Standard Design Features
We believe in building things the right way, the first time. We include some standard design details which other builders don't — these details don't break the bank, and provide a great value and utility. They help our buildings stand the test of time, and come from the experience of wishing we had included these items on previous projects.
Washer/Dryer Boxes
We include an inset washer hookup box with water supply and drain. Also, we include an inset dryer exhaust cavity so the dryer hose fits neatly in the wall and the dryer can slide all the way back to the wall.
Superior Window Flashing
For a durable, leak-resistant window installation, we use a couple of specialty products. First, we use a high-quality oil-based sealant between window flange and wall. Next, we use an upgraded Butyl flashing tape to flash the exterior of the window to the wall.
Silicone in Tile Inside Corners
Inside corners are the first places grout will crack as the building experiences slight movement over time. For this reason, before installing grout, we use silicone at all critical joints, and any joints prone to cracking. This helps keep those joints sealed and watertight over time.
Roll-on Moisture Barrier under Tile
Whenever we install tile, we use a liquid applied waterproofing membrane under the tile. This adds a waterproof layer that helps protect against leaks.
Sanded Plywood on Eave Overhangs
We use A grade sanded plywood for the roof sheathing that will be visible and painted. This means no knots on the surface, leaving a cleaner finish and long lasting paint job with no sap bleed-through.
Slab/Subfloor Grinding for Extra Flat Floor
Prior to installing flooring, we grind the entire subfloor flat. This gives a flatter floor and, more importantly, helps flooring last longer, reducing pressure on joints.
Low Profile Ceiling Mount Mini Splits
We include ceiling mounted slim-cassette style mini splits standard. These units are completely recessed inside the ceiling, and more attractive than the standard wall-mounted mini splits. Also, they don't get in the way of furniture or pictures.
High-quality Cabinets
Custom designed cabinets to fit the exact space. Custom finishes free of charge. Solid hardwood faces and doors - 1/2" plywood boxes. No MDF or OSB.
Sealant on all Concrete
We spray a "Cure and Seal" product on all our concrete work first, to ensure the moisture gets better trapped in the concrete to promote complete curing and strength, and second, to help repel stain and reduce porosity of finished concrete.
Exterior Wall Inset on Slab
We set our exterior walls into the building by 1/2" so that the plywood is flush with our foundation. This provides better protection to the plywood, and allows siding to run continuously down to the foundation with no gaps.
5/8" Thickness Roof Sheathing w/ Clips
5/8" thick plywood is stiffer than standard 1/2" plywood, and preferred when spanning 24" rafters/trusses. Promotes durability when walking on the roof and a flatter more attractive roof in the long run.
Plywood Wall/Roof Sheathing (not OSB)
We only use Plywood sheathing on walls and roof. Plywood is known for being more resistant to water than OSB, leading to a more durable structure.
Window Protection
We completely mask off windows prior to drywall to prevent any drywall dust or paint from getting into your brand new windows.
Glued Miter Joints on Trimwork
Adding glue to miter joints helps these high-visibility trim details stay tight and looking great for years.
Low Voltage Conduit
We always install an underground conduit from the main service drop to the other dwelling onsite, in order to avoid two cable lines in the air. Additionally, we provide a path from the exterior of the ADU directly to a jack inside the house where a modem can conveniently be located.
Solid-Core MDF Doors
Solid core doors have a substantial feeling. They transmit much less sound than a hollow core, and improve the sense of luxury.
Dryer Vent Box w/ Lint Screen
This box contains a removable and cleanable lint screen that traps lint before it makes its way through venting where it can lead to a clogged vent.
200A Dedicated ADU Electric Meter
200A Panel provides plenty of power for increased power consumption in the future. Second meter allows ADU occupant to pay their bill separately from main account.
Gutters + Stainless Gutter Guards
Reinforced stainless steel gutter guards help keep leaves and debris out, so gutters need far less cleaning.
Window Apron Trim Detail
Wood window aprons at bottom of windows to improve durability, and add shelf space for plants, decorations, etc.
Doorbell and Chime
Doorbell and chime wired to a transformer. Also compatible with "Ring" style cameras.
Decora Style Outlets and Switches
Decora style devices have a more uniform look and provide more options for outlets and switches.
End-of-Line Sewer Clean-out
While not required, end-of-line clean outs provide an easy way to clear any sewer clogs that may occur.
Copper Plumbing Stub-outs
Copper stub-outs provide a rigid and durable plumbing connection that will hold up over time.
Solar Attic Fan
We include a solar-powered attic vent which helps remove hot air from the attic, helping reduce heat inside the house and AC usage.
On YouTube
From the job site, on video
Foundation pours, plumbing walkthroughs and finished-home tours, filmed on our own jobs. Visit the Redwood ADU YouTube channel.
25 Thoughtful ADU Project Upgrades
Let’s talk about your backyard.
A free 10–15 minute call with Max. Honest feasibility, no sales pitch.
